|
General settings section |
|
|
Element |
Description |
|
Return only active stop points |
If this option has been selected, the dimensions of the output matrices are reduced to only active stop points. |
|
Return only terminal stop points of the TSys |
If this option has been selected, the dimensions of the output matrices are reduced to only those stop points that are either the start or the end of a vehicle journey section of the transport system. |
|
Use system routes |
If this option has been selected, the route choice will only find system routes. |
|
Route choice section |
|
|
Element |
Description |
|
Route search criterion |
In the drop-down list, you can select the route search criterion. The following criteria are provided. Time Path with shortest TSys travel time in network Distance Path with shortest TSys length in network AddValue 1, 2, 3 Path with minimum AddValue total calculated from the traversed links AddVal_TSys Path with minimum TSys-AddValue total calculated from the traversed links |
|
Links/Turns have to be permitted for TSys |
If this option has been selected, the shortest paths found do not traverse links or turns or main turns that are not open to this transport system. Note This option is only relevant if option Use system routes has not been selected. |
|
Skims section |
|
|
Element |
Description |
|
Calculate and save to file |
If the option has been selected, the respective skim matrix is calculated and, with the specific file extension, saved in the selected directory. Tip You can check or uncheck all rows in this column at once: In the column header, right click to call the context menu and click either Activate column or Deactivate column. |
|
Skim |
List of skims provided for interlining trips by transport system. Each output matrix stores the skim value of the best path per relation between selected stop points. t-PuTSys Total link run time of the transport system in [s] v-PuTSys Speed of the transport system in the network Distance Total length of the traversed links (in-vehicle distance) Direct distance Direct distance between the two stop points AddValue 1, 2, 3 Total of the particular AddValue of the traversed links AddValue_TSys Total of the TSys-AddValue of the traversed links |
|
Ext. |
The skim-specific file extension is added automatically to the uniform matrix file name. It is used for the identification of the skim whose values are stored in the output matrix. Note Please note that renaming a file extension may cause identification problems, since the manual and PTV Vision Support refer to standard file extensions. |
|
Default |
Default entry if no path can be found for a relation between stop points. |
|
Min. value |
Default entry if the calculated skim value goes below the Min. value for a relation between stop points |
|
Max. value |
Default entry if the calculated skim value exceeds the Max. value for a relation between stop points. |
|
Dec. |
Number of decimal places in the matrix |
|
Value for diagonal |
Default value for the diagonal |
|
Output file section |
|
|
Element |
Description |
|
File name |
Via the Note The specific file extension is added automatically. |
|
Format |
In the list, click a format for output files (Matrix formats). |
|
Confirm overwriting |
If this option has been selected, a query will appear if files with identical path and name shall be overwritten. |
button, you can enter or select the file name (and path, if applicable) for the matrices of interlining trips.
